If you're an enthusiast of the BDSM lifestyle, then you probably know the importance of having a proper spanking bench in your playroom. Not only does it provide additional excitement and fun, but it also makes the experience more enjoyable and safe for both the dominant and submissive. However, purchasing quality BDSM furniture may sometimes be out of budget. But fear not, as we're about to teach you exactly how to build your very own spanking bench! So, grab your tools and let's get creative.
Oh and... If you're looking for something different, check out the BDSM furniture created by Sensory London. The restore antiques and turn them into beautiful BDSM furniture masterpieces.How To Build BDSM Furniture Spanking Bench Table of Contents
Materials and Tools Needed
- Wooden planks (2x4s or 2x6s)
- Plywood sheet (at least ¾-inch thick)
- Sturdy hinges
- Padding (high-density foam, cushion, or carpet padding)
- Faux leather or any other desired upholstery material
- Staple gun
- Screws
- Wood glue (optional)
- Corner braces
- Measuring tape
- Saw
- Drill
- Screwdriver
Step 1: Create the Frame
Begin by measuring and cutting your wooden planks to create the frame of your spanking bench. You will need two pieces for the length (typically around 36-40 inches), two pieces for the width (about 18-20 inches), and four pieces for the legs, each about 18 inches. Assemble the frame using screws and corner braces to secure everything together. Optionally, you can use wood glue for added strength.
Step 2: Attach the Plywood Surface
After the frame is built, measure and cut the plywood sheet according to the dimensions of your frame. Attach the plywood to the top of the frame using screws. To ensure a smooth surface, you can sand the edges and corners of the plywood.
Step 3: Add Padding and Upholstery
Next, attach the padding of your choice to the plywood surface using a staple gun. Depending on the thickness of your padding, you may need to trim it down to fit comfortably on your spanking bench. After the padding is secure, cover it with your chosen upholstery material. Be sure the material is smooth and wrinkle-free as you staple it to the plywood.
Optional: Add a Hinged Support for Adjustability
If you want an adjustable bench, you can include a hinged support. To do this, cut a wooden plank long enough to support your bench at the desired angle and attach it with hinges. Ensure that the hinges are sturdy to prevent your spanking bench from accidentally collapsing during use.
How To Build BDSM Furniture Spanking Bench Example:
Here's a practical example of a spanking bench you can build using the steps above:
- Frame: Constructed using 2x4 wooden planks, with the following measurements:
- Length: 38 inches
- Width: 20 inches
- Legs: 18 inches
- Plywood surface: Cut to fit the dimensions of the constructed frame (38 inches x 20 inches).
- Padding: 2-inch high-density foam, trimmed down to fit the spanking bench.
- Upholstery: Black faux leather, tightly stretched and stapled onto the plywood surface.
- Optional hinged support: 15-inch wooden plank, attached to the frame using sturdy hinges.
You've now successfully created your very own spanking bench! With some craftsmanship and creativity, you can design it to perfectly suit your needs and fantasies. Now, go ahead and explore the pleasures and excitement of your homemade BDSM furniture by putting it to good use! Share this article with friends who might be interested, and check our other guides at Filthy Adult. Don't forget to explore our fetish shop as well to find more ways to spice up your BDSM experience. Happy spanking!
